美隆電子有限公司

Mayloon Electronic Company Limited

  • Increase font size
  • Default font size
  • Decrease font size
Home

Fuse Resistor

E-mail 列印 PDF

Resistor 繞線保險絲電阻

PDF File  Data Spec Wire Wound Fusible Resistor - FR Series

Resistor FEATURES SINLOON®
The Fusible resistor is applied to safety circuit in wide range of electronic sets.
Complete flame proof construction resistance range 0.33R ~ 1K ohm
Resistance tolerance  ±2%, ±5%.
There are 5 color band is in white color means wire wound fusible resistor
The fusing time 60/sec Max.
Resistor EXTERNAL DIMENSIONS
Type Power DIMENSION (mm)
L ΦD H Φd
FR025 1/4W 6.3±0.5 2.3±0.3 28±2 0.55±0.03
FR50S 1/2WS 6.3±0.5 2.3±0.3 28±2 0.55±0.03
FR50 1/2W 9.0±0.5 3.2±0.5 28±2 0.65±0.03
FR100S 1WS 9.0±0.5 3.2±0.5 28±2 0.65±0.03
FR100 1W 11.5±1.0 4.5±0.5 35±2 0.78±0.03
FR200S 2WS 11.5±1.0 4.5±0.5 35±2 0.78±0.03
FR200 2W 15.5±1.0 5.0±0.5 35±2 0.78±0.03
FR300S 3WS 15.5±1.0 5.0±0.5 35±2 0.78±0.03
Fuse Resistor (溶斷保險絲電阻)
Data Sheet  Fusible Resistor - FR Series
Resistor RATED POWER
Type Power Limiting Element Resistance Resistance Operating
Voltage Range Tolerance temperature Range
FR025 1/4W 200V 1R~1KΩ G=±2% J=±5% -40~ +155
FR50S 1/2WS 250V 1R~1KΩ
FR50 1/2W 250V 1R~1KΩ
FR100S 1WS 300V 1R~1KΩ
FR100 1W 300V 1R~1KΩ
FR200S 2WS 350V 1R~1KΩ
FR200 2W 350V 1R~1KΩ
FR300S 3WS 400V 1R~1KΩ
Remark: The products value range for standard resistance, below or over this resistance on request please contact us.
: 如有低於或高於規格參數阻值的要求請聯絡我們
Resistor INTRODUCTION
FR Type (Standard)
Rated power : 1/4W ~ 2W; 1/2WS ~ 3WS.
Superior quality fusible resistors which are flameproof during operation These resistors fuse
in less than 30 seconds at 16 times rated power

保險絲電阻 Fusible Resistor

 
No images
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Connection


Who's Online

現在有 260 訪客 在線上

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

Newsflash

功率因數 (PF)

知慳惜電

 

功率因數 (PF)

PFC功率因數修正器: Power Factor Corrector

功率因數:主要用來表示電子產品對電能的利用功率。是在交流電力中特有的物理量,是一種負載所消耗的有功功率與其視在功率的比值, 0 1 之間的無因次量。 當功率因數越高,說明電能的利用效率越高。

功率因數指的是有效功率與總耗電量(視在功率)之間的關係,也就是有效功率除以總耗電量的比值。基本上功率因數可以衡量電力有效利用的程度,當功率因數值越大,代表其電能利用率越高。

功率因數是用來衡量用電設備用電效率的參數,功率因數代表低電力效能。為了提高用電設備功率因數的技術就稱為功率修正器。

有效功率代表一電路在特定時間作功的能力,視在功率是電壓和電流有效值的乘積。純電阻負載的視在功率等於有功功率,其功率因數為1。若負載是由電感、電容及電阻組成的線性負載,能量可能會在負載端及電源端往復流動,使得有功功率下降。若負載中有電感、電容及電阻以外的元件(非線性負載),會使得輸入電流的波形扭曲,也會使視在功率大於有功功率,這二種情形對應的功率因數會小於1。功率因數在一定程度上反映了發電機容量得以利用的比例,是合理用電的重要指標。

 

如欲索取更多的產品訊息請與我們聯絡。