美隆電子有限公司

Mayloon Electronic Company Limited

  • Increase font size
  • Default font size
  • Decrease font size

IEC Publication 63

電阻

STANDARD RESISTANCE VALUE IN A DECARD
誤差率 阻值表示法 電阻功率代碼 溫度系數
Tolerance E96 E24 Power Codes T.C.R/
A= ±0.01% m5=R0005Ω m5=R0005Ω 1/32W Z S=±5ppm
B= ±0.1% 5m=R005Ω 5m=R005Ω 1/16W Y B=±10ppm
C= ±0.25% 50m=R05Ω 50m=R05Ω 1/10W X N=±15ppm
D= ±0.5% 100m=R1Ω 100m=R1Ω 1/8W W C=±25ppm
F= ±1% 1000m=1Ω 1000m=1Ω 1/4W V D=±50ppm
G= ±2% 1R = 1R00 1R = 1R0 1/2W U E=±100ppm
H= ±3% 10R=10R0 10R=100 3/4W T K=±150ppm
J= ±5% 100R=100R 100R=101 1W S F=±200ppm
K= ±10% 1K = 1001 100R=102 1.5W R G=±300ppm
M= ±20% 10K = 1002 10K = 103 2W Q H=±400ppm
N= ±50% 100K=1003 100K=104 2.5W P I=±500ppm
Z=+80-20% 1M=1-004 1M=105 3W N J=±600ppm
10M=1005 10M=106 3.5W M V=±800ppm
100M=1006 100M=107 4W (5W) L (K) Z=±1500ppm
Resistor Series Ordering Information :
±1%: Marking Code please refer to E96  data form as below :
Ex. 121K the marking code is 1213 in E96
10R ohm the marking code is 1009 E96
1R ohm the marking code is 1008  E96
0.1R ohm the marking code is 0R10 E96
±5%: Marking Code please refer to E24 data form as below :
Ex. 100K the marking code is 104 in E24
10R ohm the marking code is 100 E24
1R ohm the marking code is 1R0 E24
0.1R ohm the marking code is 0R1 E24
For Resistance According to IEC Publication 63
E24 E96
10 100 178 316 562
11 102 182 324 576
12 105 187 332 590
13 107 191 340 604
15 110 196 348 619
16 113 200 357 634
18 115 205 365 649
20 118 210 374 665
22 121 215 383 681
24 124 221 392 698
27 127 226 402 715
30 130 232 412 732
33 133 237 422 750
36 137 243 432 768
39 140 249 442 787
43 143 255 453 806
47 147 261 464 825
51 150 267 475 845
56 154 274 487 866
62 158 280 499 887
68 162 287 511 909
75 165 294 523 931
82 169 301 536 953
91 174 309 549 976
最近更新在 週二, 24 四月 2018 09:48  
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

Newsflash

溫度對電阻的影響

產品應用 溫度對電阻的影響

RS  電阻的產生 
 金屬由一群依一定規則排列原子構成,每顆原子均有一層 (或多層) 由電子組成的外売。這些在外売的電子能脫離原子核 
 的吸引力而到處流動,是金屬能導電的主要原因。當金屬兩端產生電勢差 (即電壓) 時,電子因電場的影晌而作規則的流 
 來源。動,是為電流。在現實中,物質的原子排列不可能為完全規則,因此電子在流動途中會被不按規則排列的原子打散,
 是為電阻的  高溫加速電子運動,增加電子被打散的機會,故熱的物體電阻較高。 
 橫切面面積大的金屬有較多空間予電子流動,故電阻較小。 
 電子橫過較長的金屬時一般會發生較多的碰撞,故長的金屬電阻較大。

Application  當溫度升高,為什麼半導體的電阻會下降﹖