不燃性金屬膜阻值電阻器

Flame-proof Typ Metal Film Low Ohm Resistor - FML Series  (不然性)

INTRODUCTION

The FMF series flame-proof Carbon Film Resistors are manufactured by Coating a homogeneous film of pure carbon on high grade ceramic rods, resistance less than 10 have an electro less deposited nickel film, and are coated with layers  of gray color flame-proof lacquer. These resistors meet overload tests in accordance with UL specification  without producing a fire hazard.

DIMENSION (mm)
Power:	STYLE	Dimension (mm)
		L	D	H	d
1/4W	FML25	6.3±0.5	2.3±0.3	29±2.0	0.55±0.03
1/2W	FML50	9.0±0.5	3.2±0.5	26±2.0	0.65±0.03
1W	FML100	11.5±1.0	4.5±0.5	35±2.0	0.78±0.03
2W	FML200	11.5±1.0	4.5±0.5	35±2.0	0.78±0.03
1/2WS	FML50S	6.3±0.5	2.3±0.3	29±2.0	0.55±0.03
1WS	FML100S	9.0±0.5	3.2±0.5	26±2.0	0.65±0.03
2WS	FML200S	11.5±1.0	4.5±0.5	35±2.0	0.78±0.03
ELECTRICAL CHARACTERISTICS
Style			FML25	FML50	FML50S	FML100	FML100S	FML200	FML200S
Power Rating 70oC			1/4W	1/2W	1/2WS	1W	1WS	2W	2WS
Operating Temp. Range			-55oC ~ +155oC
Max. Working Voltage			250V	350V	350V	500V	400V	500V	500V
Max. Overload Voltage			500V	700V	600V	1000V	800V	1000V	1000V
Dielectric Withstanding Voltage.			400V	500V	400V	750V	600V	750V	750V
Value Range  ±1%, ±5%			0.1Ω ~0.99Ω
Temp. Coefficient (by Type)			±50ppm, ±100ppm.
* Standard resistor is 10Ω ~ 1MΩ, below or over this resistance on request.
＊ Mayloon characteristic parameters of electronic product specification changes or updates without prior notice。