美隆電子有限公司

Mayloon Electronic Co., Ltd.,

  • 增加字體大小
  • 預設字體大小
  • 減少字體大小

Ultra Low Ohm Chip Resistor

E-mail 列印

 

Chip Resistor 超合金大功率低阻值貼片電阻

PDF File Ultra Low Ohm (Metal Strip) Chip Resistor - ML Series

SINLOON® 超合金低阻值貼片電阻 MLR Series
Power : 3W Ultra Low Ohm Chip Resistor
Chip Resistor Feature
Stable high frequency characteristic with reduced lead inductance and excellent frequency response.
Excellent frequency response.
Low thermal EMF (<1μV/).
High-temperature performance (up to +170).
Very low inductance 0.5nH to 5nH
Ideal for all types of current sensing, voltage division and pulse  applications including switching and linear
power supplies, instruments, power amplifiers.
Pure tin plating provides compatibility with lead (Pb) and lead containing soldering processes.
Excellent stability (IR/RI≦±0.5% for 1000h at 100) different environmental conditions.
Application
Power supply  Battery pack  DIY tools ; Inverter / Converter (AC/DC, DC/DC, DC/AC.)
Measurable instrument;  Consumer electronics; Note book  PC power pack  LED driver
Others ( Auto tronics etc)
GENERAL ELECTRICAL SPECIFICATION
Power Case Type Resistance Range Tolerance TCR Working Overload Point of Plant front
at 100 0 J: ±5% (ppm/) Current Max. Current Max. Solder Plating side coating
3W 2512 N-MLR12 m50 Ω m50 Ω ±100 77.5A 173.2A Metal Strip Green
3W 2512 N-MLR12 m75 Ω m75 Ω ±100 63.3A 141.4A Metal Strip Green
Operating Temperature Range. -55~+170
The direct or alternating voltage for the rated power can be calculated from the following formula but must not exceed the maximum voltage.
Operating Current I= (P/R);  Operating Voltage:  V=(P*R)
E=Rated voltage (V) E=R×P P=Power rating (W) R=Nominal resistance (Ω)

Return to Chip Resistor

Ultra Low Ohm Chip Resistor

 
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Food Waste Machine

廚餘機

UPL 產品介紹

UPL LED Lighting
UPL-LED Lighting 儲電式應急照明 可持續在無電情況下照明的神奇應急LED照明燈, 一款具備多功能新產品 非一般的燈泡,當遭遇停電或火警斷電時自動亮燈.

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

消息

美隆照明有限公司
承接換燈照明工程:
更新換舊
各類型照明燈具
瑩光燈管換LED燈管
包括:燈管支架/有罩燈盤/格柵燈盤等
歡迎來電查詢
MP.:91808452

Newsflash

簡單量測電阻方法

技術應用

產品應用

T 簡單量測電阻的方法

簡單量測電阻方法

 

電阻在電子產品中是最常用的零部件,在投入生產線使用前(QA)量測電阻是最基本的品檢工作環節,從量測到的電阻可以知道其電阻系數等的質材是否可靠,因此,透過電阻量測往往可以檢測出這些電阻在電路中的位置是否可以得到適當的使,其參數穏定會影響產品合格率的重要關健因素。

電阻量測最簡單的方法就是用一個三用電表的兩根探針(如圖/圖片放大)點觸在被測電阻導體電極的兩端,然後從電表上就可以讀到其電阻數值。

這是最簡單也是最普遍用來量測電阻元件以及檢查電路是否短路抑或開路的方法,這種檢測方法一般稱為 [二點探針] 量測。

雖然是簡單但卻很難用在高精密度超低超高電阻及電阻材料電性的檢測上,因為材料的電阻系數很難從兩點探針測量出準确性的電阻,這主要是因兩點探針在量測中,電流的提供與電壓的量測共用一根探針所引起的。要更好量測電阻的方法須採用 [四點探針] 會比兩針來的更好不過了。

若把電流和電壓分別改用四根探針分路量測電流和電壓,就可以解決這問題。專業的電阻制造廠都會使用四點探針量測的方法來量測電阻的可靠性及準确性。

雖然四點探針比兩點探針量測來得好,但正确的電阻量測卻和量測儀錶設備,使用的器具乃至所使用的量測條件都有關係。