金屬釉高壓高阻值電阻
Metal Glaze High Ohm Resistor - MGHO
 SCOPE:  電阻兩端鐵帽電極的距離1mm,可以承受1KV的脈衝高壓. |
|||||||
| This specification is available for Metal Glaze Resistor manufactured by Mayloon. | |||||||
| The resistor is manufactured highly quality-controlled process and guaranteed high reliability. | |||||||
| STANDARD MEASURING CONDITIONS | |||||||
| Temperature 20±2℃, Humidity 65±5℃. | |||||||
| Being on about about the judgment, measurements can be made within the following | |||||||
| Temperature 5 ~ 35℃, Humidity 45 ~ 85%. | |||||||
| RATED POWER | |||||||
| Type | Power | Maximum Voltage | Dielectric withstanding Vol. | Resistance (Ω) | |||
| Working | Overload | Silicon | Epoxy | Standard | High ohm | ||
| MGHO0204 | 1/8W | DC500V | 1000V | 300V | 400V | 100K~910M | 1G ~ 10G |
| MGHO0207 | 1/4W | DC1600V | DC2000V | 400V | 500V | 100K~910M | 1G ~ 10G |
| DC1800V | AC1500V | ||||||
| MGHO0410 | 1/2W | DC2000V | 2500V | 500V | 700V | 100K~910M | 1G ~ 10G |
| MGHO0516 | 2W | DC3500V | 4000V | 700V | 1200V | 100K~910M | 1G ~ 10G |
| T.C.R: | ±200ppm/℃, ±100ppm/℃. ±50ppm/℃. | ||||||
| Tolerance: | F: ±1% E24, J:±5% E24, K:±10% E12. >1G ( ±10%) E12. | ||||||
| Operating Temperature Range: | -55℃ ~ 155℃ Rating ambient Temp. ±70/℃ | ||||||
| * Rated power is maximum power which can continuously loaded at specified ambient temper mined 70℃, however when the |  |
||||||
| ambient temperatures exceeds 70℃, rated power should be determined from the dating curve of Fig 1. | |||||||
| * Silicon Resin: Brown (Flame-Proof) , Epoxy Resin: Light Blue. | |||||||
金屬釉高壓電阻
| < 前一個 | 下一個 > |
|---|
