金屬氧化膜電阻器
Metal Oxide Film Resistor - MOR Series
 INTRODUCTION |
|||||||||
| These Metal Oxide Resistors offer excellent performance in applications where stability and uniformity of | |||||||||
| characteristics are desired. They provide lower cost alternatives to Carbon Composition Resistors and | |||||||||
| General Purpose Metal Films. Metal Oxide also can replace many low power General Purpose Wire wound | |||||||||
| applications, saving both money and time, with shorter delivery cycles. | |||||||||
| DIMENSION (mm) |
SINLOON® | ||||||||
| Power: | STYLE | Dimension (mm) |  |
||||||
| L | ΦD | H | Φd | ||||||
| 1/4W | MOR-25 | 6.0±0.2 | 2.3±0.3 | 28±2 | 0.5±0.02 | ||||
| 1/2W | MOR-50 | 9.5±0.5 | 3.2±0.5 | 26±2 | 0.6±0.02 | ||||
| 1W | MOR-100 | 11.0±0.5 | 4.5±0.5 | 35±2 | 0.7±0.02 | ||||
| 2W | MOR-200 | 15±0.5 | 5.0±0.5 | 32±2 | 0.8±0.02 | ||||
| 3W | MOR-300 | 17±0.5 | 6.0±0.5 | 32±2 | 0.8±0.02 | ||||
| 5W | MOR-500 | 25±1 | 8.0±0.5 | 35±3 | 0.8±0.02 | ||||
| RATED POWER |
|||||||||
| Type | Power 70℃ | Maximum Voltage | Dielectric withstanding | Max.intermittence | Res. E96 | T.C.R. | |||
| Working | Overload | Voltage (AC) | Overload Voltage | Range(Ω) | ppm/℃ | ||||
| MOR-25 | 1/4W | 250V | 400V | 300V | 400V | 1R ~510K | ±350 | ||
| MOR-50 | 1/2W | 350V | 700V | 350V | 700V | 1R ~510K | ±350 | ||
| MOR-100 | 1W | 350V | 700V | 350V | 1000V | 1R ~510K | ±350 | ||
| MOR-200 | 2W | 350V | 700V | 500V | 1000V | 1R ~510K | ±350 | ||
| MOR-300 | 3W | 500V | 1000V | 1000V | 1000V | 1R ~510K | ±350 | ||
| MOR-500 | 5W | 500V | 1000V | 1000V | 1000V | 1R ~510K | ±350 | ||
| Operating temperature Range: | -55℃ ~ 155℃ | ||||||||
| FEATURES |
|||||||||
| High power-to-size ratio for significant space savings. |  |
||||||||
| Excellent long-term stability. | |||||||||
| Complete flameproof construction. | |||||||||
| High surge/overload capability. | |||||||||
| Wide resistance range : 1Ω ~ 180K Ω. | |||||||||
| Standard tolerance : ±5% ,± 2% | |||||||||
金屬氧化膜電阻 Metal Oxide Film Resistor
| < 前一個 | 下一個 > |
|---|
