Data Sheet 
Cement Resistor - SQM Type
FEATURE
- Exceptionally small and sturdy, mechanically safe.
- Excellent electrical characteristic
- Tolerance of ±5% and ±10% are standard.
- Non-inductive type are available on request.
- Heat and flame resistance
- The materials used and the construction techniques ensure excellent flame resistance, arc resistance and moisture resistance as well as self-extinguishing capabilities, They will withstand the most rigorous loading test.
- As resistors in radio and television receiver, The hazardous conditions of smoking and reheat can be completely prevented by the proper choice of power resistors.
- For high resistance value, The winding core will be replaced by metal oxide film core (RS Type)
- Applicable specifications: EIA RS-344 and EIA RC-649
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| CM-SQH | CM-SQP | CM-SQM | CM-SQT | CM-SQZ | CM-SQV | CM-MPH | CM-AH | CM-PHD | CM-MPR |
 DIMENSION AND DATA RATING |
|||||||||
| Type | Value Range (Ω) | Max working | Dimension (mm) | ||||||
| CM-SQM | Wire Wound | Metal oxide | voltage | L | H | W | D | P | d |
| 2W | 0.01~50 | 50~50K | 150V | 20.0 | 5~15±1 | 11.5 | 7.5 | 5.0±2 | 0.65±0.03 |
| 3W | 0.01~50 | 50~50K | 300V | 25.0 | 5~15±1 | 12.0 | 8.5 | 5.0±2 | 0.8±0.03 |
| 5W | 0.01~50 | 50~50K | 350V | 25.0 | 5~15±1 | 13.0 | 9.0 | 5.0±2 | 0.8±0.03 |
| 7W | 0.01~100 | 100~47K | 500V | 39.0 | 5~15±1 | 13.0 | 9.0 | 5.0±2 | 0.8±0.03 |
| 10WS | 0.01~100 | 100~47K | 750V | 35.0 | 5~15±1 | 16.0 | 12.0 | 7.5±2 | 0.8±0.03 |
| 10W | 0.01~100 | 100~47K | 750V | 51.0 | 5~15±1 | 13.0 | 9.0 | 5.0±2 | 0.8±0.03 |
| Resistance Range for standard resistance, Below of over this resistance request. |  |
 |
|||||||
| Non-inductive type up 50Ω only. | |||||||||
| < 前一個 | 下一個 > |
|---|
